Sizes = 8', 10', or 24'
The PA210 10ft to 17ft Aluminum Extension Plank is ideal for use on stepladders, telescoping multi-ladders, extension trestle ladders and extension and single straight ladders equipped with ladder jacks. Positive stops on the plank prevent overextending. Molded thermo-plastic spacer guides allow for easy open/close action. Made of 2in deep box section extrusions. Heavy end flange/handles for rigidity and ease of operation. Outer flange is open for ladder jack clamps. The extruded cross members are riveted with solid aluminum rivets. Locking mechanism sets the plank in 12in increments. 250lb load capacity.
3-inch high performance trash pumps keep your job site dry
The PT 3 series of self-priming, centrifugal trash pumps have proven themselves on job sites around the world. The high-performance, durable pumps can move up to 400 gpm (1515 l/m) and solids up to 1.5 inches (38mm). With the radial flow design, quality components and built-in contractor friendly features these pumps have redefined the durability standards of a job site pump. The PT 3 series is popular for general dewatering of excavations, flooded basements, manholes, utility vaults, mining work, swimming pools, lakes and barge holds or wherever there is unwanted water
The PT 2 series of centrifugal trash pumps are reliable dewatering tools for a variety of applications. The lightweight pumps can handle up to 210 gpm (795 l/m) and solids up to one inch (25 mm) and are ideal for general dewatering of excavations, flooded basements, manholes, utility vaults, mining work, swimming pools, lakes and barge holds or wherever there is unwanted water. With the radial flow design and built-in contractor friendly features, this line of trash pumps has redefined the quality and durability standards of self-priming, centrifugal trash pumps.
The Ranger® 225 is a multi-process, engine-driven welder designed for a variety of processes - stick, TIG, MIG or flux cored. Whatever the process or application, arm yourself to get the job done and get it done right the first time.
Totally enclosed case protects the engine and limits noise
Smooth DC welding output
10,500 Watts AC generator power
Totally Enclosed Case
Engine is fully protected.
3 service access doors.
Low noise - 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output.
Provides stronger clamping along the entire bending edge for crisp, clean bends without oil canning, or warping.
Makes the second step of "hemming" to 180° even easier
Our new castings and pivot arms are 5% lighter yet 10% stronger than our original. Adds life to the casting and produces more precise bends.
Provides stronger clamping along the entire bending edge for crisp, clean bends without oil canning, or warping.
Makes the second step of "hemming" to 180° even easier
Our new castings and pivot arms are 5% lighter yet 10% stronger than our original. Adds life to the casting and produces more precise bends.
The Bosch HD18-2 Two-Speed Hammer Drill features a muscular 8.5 Amp motor that handles all masonry drilling applications, delivering a max of 51,000 BPM for muscle and durability. The tool's drilling capacities range from 3/4- In. for masonry applications to 1-1/2- In. for wood. The HD18-2 features a torque-control auxiliary handle, which locks into place; the handle has a built In. depth gauge. The dual-mode selector easily converts from rotation-only to hammer-drill mode. A rotating brush plate allows users to easily back out bound-up bits. It has two speed settings, one for high speed and one for high torque. Because of its heavy-duty three-jaw 1/2- In. chuck, the tool has a high clamping force that helps prevent drill bits from slipping. This robust drill has a metal front housing for longer life, a pistol-grip handle with soft-grip design and an integral slip clutch for security against recoil.
Power through concrete - drill holes of up to 350 mm in diameter
3200 watt motor and 3-speed gearbox for core drilling up to 350 mm in reinforced concrete
Long lifetime due to robust design and gearbox with oil-bath lubrication
Stand-mounted drilling in a system with GCR 350 drill stand (part number 0 601 190 200)
Bosch Power Tools deliver stronger performance and lasting reliability. The Bosch PS11 angle drill/driver offers better balance and control. It is perfect for working in tight spaces. It is compact and lightweight. The soft grip body is optimized for a secure grip.
Precise, efficient and convenient - the ideal solution for metal drilling
Convenient, durable, highly efficient and safe: Laser technology offers a fast target set-up, powerful motor for durable and efficient precise drilling, power supply cut-off system to prevent electric shock
Smart HMI system: Service display alert for preventive maintenance (carbon brush change) and load alert indicator for a long tool lifetime
Ideal for tough metal core drilling: High magnetic force gives a strong support to the drilling
The Bosch PS31 12 V Max 3/8 In. Drill/Driver has professional-grade power for 90 percent of tasks, but it weighs just over two pounds. An ideal tool to carry to any worksite, this tool provides 265 In.-Lbs. of max torque. With two speeds (0-350 RPM and 0-1,300 RPM) and 20+1 torque settings, it is a carry-along solution for applications such as installing and electrical work that requires a great deal of overhead drilling and driving. It features a 3/8 In. single-sleeve three-jaw chuck that securely holds bits. It has an integrated LED light, an integrated fuel gauge and Bosch's lightweight 12 V Max power system that delivers longer runtime with no increase in weight.
Fast and easy starts, even in the hardest materials like porcelain and granite. Quick Changeuniversal hole saw system allows change to any size or type of hole saw in seconds. For use only with machines designed for wet sawing and on a GFCI-protected circuit.
Powerful D-grip, triple-mode SDS Plus (TE-C) rotary hammer with chipping function
Weight according EPTA-Procedure 01/2003: 7.5 lb.
Hammer drilling diameter range: 5/32 - 1-3/32 in
Optimum Hammer drilling range: 1/4 - 5/8 in
Features
Ergonomically designed D-grip for comfortable use over long periods
Robustly built - engineered for maximum reliability and long life
High drilling performance
Virtually dustless drilling when used with the DRS-M dust removal system
Quick-change TE-C Click chuck for versatility and ease of use
Applications
Drilling and hammer drilling in concrete and masonry
Corrective chiseling and small channel openings in concrete
Occasional drilling in wood and steel with optional quick release chuck
Drilling in concrete in clean areas with integrated Dust Removal System (DRS-M)
Cutting socket recesses in masonry
Versatile rear-handle 70 cc gas saw with auto-choke - cutting depth up to 5"
Motor cylinder: 68.7 cm³
Rated power: 3.5 kW
Wet or dry operation: Wet and Dry
Features
Most versatile gas cut-off saw in its class - even convertible to flush-cut mode
Easy-start gas saw - unique auto-choke helps to make first-pull ignition the norm, and flooded engines virtually impossible
Robust - upgraded air filters and re-engineered internal components help the gas saw to deliver uninterrupted, high performance
Easy self-service maintenance - pre-tensioned belt and virtually unbreakable starter rope help to minimize the saw's maintenance downtime
Compatible with the DSH-P water pump - feeds water to your gas saw from any source, no pressurization needed
Canycom’s highly popular SC75 Concrete Buggy with a rubber track undercarriage transports concrete with ease over rough terrain causing minimal impact to the ground surface.
Heavy duty rubber tracks offer balanced weight distribution to travel with ease over wet, muddy ground, rough, uneven terrain and loose sand and gravel. Our SC75 Concrete Buggy outshines in efficiency and maneuverability compared to wheeled buggies, and has time after time proved to save the user costs in time, money, and energy.
The SC75 offers ease of operation, low cost maintenance, and high return on investment.
The BPS series is distinguished by its outstanding handling capabilities. Moving and turning these vibratory plates on fresh asphalt is unsurpassed in comfort and produces clean finishes with no marks. Even clean finishes at curbs are easy to produce due to the angular side edges of the base plate. The guide handle responds precisely to steering movements while still achieving low hand-arm vibrations of less than 5 m/s², which makes long and comfortable working conditions possible.
Made from the finest extruded magnesium available, MARSHALLTOWN Magnesium Bull Floats are lightweight and properly balanced to provide a professional, smooth finish. Choose between a round end or square end blade either with or without an adjustable RotaLeveler™ bracket. These concrete Bull Floats are 8" wide, come in a variety of lengths, and are Made in the USA with Global Materials.
Magnesium blade material is durable, long-wearing, and properly balanced
Pick your preferred blade length to suit your job size
All blades are 8" wide
Choose between a square end or round end blade
Available with or without a RotaLeveler™ bracket
Adjustable RotaLeveler™ bracket fits most 1 ⅜" and 1 ¾" push-button handles
The MARSHALLTOWN T-Slot Walking Darby comes with your choice of an adjustable all-angle Bull Float bracket or 360° Twist Bracket that can be positioned anywhere on the blade, making it ideal for floating over concrete and working in tight places. You have your choice between a round end or square end blade to suit your preference. Blade is lightweight and durable, ranging in lengths from 24" to 36". These concrete Darbies are Made in the USA with Global Materials.
Bull Float bracket or 360° Twist Bracket increases your reach and reduces your need to bend over
Magnesium blade material is durable and lightweight
Blade sizes: 24" - 36"
Pick between a round end or square end blade
Our Pneumatic 18 Ga Brad Finish Nailer is compact and rugged giving you better access to tight spots. It's open line of sight lets you place nails exactly where you need them.
Weighs only 2.9lbs
Keeps you working with a consistent drive
Reduce jams and misfires by using genuine Paslode nails
Paslode pneumatic nailers enable you to finish with consistency and precision.
This flooring stapler kit is utilized for hardwood flooring installation. Pneumatic power drive staples into the wood surface quickly and efficiently. This reliable flooring stapler can be depended on for stability and a comfort grip.
Features
High-speed, mallet actuated pneumatic operation increases productivity over manual methods. Extra-wide composite base plate for stability (1/2" (13 mm) and 3/4" (19 mm) base plates included) Long reach handle for comfort and control (short handle optional) Kit includes: Stapler, Mallet, Base Plates
Applications
Solid Hardwood Flooring Engineered Hardwood Flooring